Products

Home

Centre drill TCT cutter Endura

Centre drill for TCT cutters Endura (0902).

More info...

Metal cutting foam

Metal cuttin foam for TCT cutters Standard (0900) and Endura (0902).
Metal cutting foam is recommended when drilling in all kinds of metal with HSS Bimetal saws or TCT cutters.
Use ProFit cutting foam, for a smoother cut and a longer life.

More info...

Accessories Multi Purpose Long hole saws Click & Drill ®

Accessories Multi Purpose Long (0928) Click&Drill®.

More info...

TCT cutter Endura

TCT cutter Endura (0902).
The ideal cutter for heavy metal work, magnetic drilling presses become obsolete.
The multiple angles of teeth ensure a perfect cut.
The Endura has a long tool life, is regrindable and cuts up to 5 times faster than a HSS Bimetal hole saw. 
Using ProFit cutting foam, for a smoother cut and a longer life, is recommended .

Available in the sizes: 15 t/m 60 mm
Fur use in: Stainless steel, steel, aluminum, copper, cast iron and metal alloys.
Cutting depth: Max 25 mm
Shank size: 12,7 mm

More info...

Transition hex Click & Drill ®

Transition hex for Multi Purpose (0908) hole saws and
HSS BiMetal PLUS hole saws with variable- (0904) and constant (0905) pitch.
 
This tool is provided with a hex of 10 mm on one side and a hex of 8 mm on the other side.
The transition hex makes it possible to enlarge an existing hole <30 mm to a hole of ≥ 32 mm.

More info...

Centre drills for Multi Purpose hole saw Click & Drill ®

Centre drills for Multi Purpose hole saws Click&Drill®.
for Multi Purpose hole saws (0908), cutting depth 52 mm.
Size 1 (hex 8 mm) for hole saws 16-30 mm.
Size 2 (hex 10 mm) for hole saws >32 mm.

More info...

Hole saws Multi Purpose Long

Multi Purpose Long hole saws with TCT teeth and an integrated Click&Drill® adapter (0928).
For deep holes up to 152 mm.
To be used in wood, particle board, MDF, bricks, plastics and tiles (with a hardnes upto 4).
Available sizes: 32-210mm.
The TCT tooth are regrindable.
Centrepin not included.
 
Quick change of the hole saw.
Enlarging an existing hole.
Drilling at an extreme angle.
 
GENERAL INSTRUCTIONS
A. First drill a hole with a 10 mm Lewis type Auger drill or masonary drill.
B. Click the centerpin onto the Multi Purpose LONG.
C. Put the centerpin in the pre-drilled hole and start carefully sawing with the Multi Purpose LONG.
 
Attention !
Use a drilling machine with sufficient power because of the high torque required for these holesaws.
The size of the hole may differ because of the way of drilling.
The tolerance of the hole saw may differ +/- 1 mm.
Use safety goggles and turn off the hammer function of your drilling machine.
The manufacturer accepts no liability for injury or damage to materials.
Use the Multi Purpose holesaw at the recommended speed.

More info...

Hole saw sets Multi Purpose Long

Multi Purpose Long hole saws sets with TCT teeth and an integrated Click&Drill® adapter (0928).
For deep holes up to 152 mm.
To be used in wood, particle board, MDF, bricks, plastics and tiles (with a hardnes upto 4).
Available sizes: 32-210mm.
The TCT tooth are regrindable.
Centrepin included.
 
Quick change of the hole saw.
Enlarging an existing hole.
Drilling at an extreme angle.
 
Sizes (see composition). Other compositions on request.

More info...

Hole saw sets Multi Purpose

Multi Purpose hole saws sets with TCT teeth and an integrated Click&Drill® adapter (0908).
To be used in wood, particle board, MDF, bricks, plastics and tiles (with a hardnes upto 4).
Available sizes: 16-330 mm.
Cutting depth: 52 mm.
The TCT tooth are regrindable.
 
Quick change of the hole saw.
Easy removal of the plug.
Drilling at an extreme angle.
Enlarging an existing hole.
 
Sizes (see composition). Other compositions on request.

More info...

Hole saws Multi Purpose

Multi Purpose hole saws with TCT teeth and an integrated Click&Drill® adapter (0908).
To be used in wood, particle board, MDF, bricks, plastics and tiles (with a hardness upto 4).
Available sizes: 16-330 mm.
Cutting depth: 52 mm.
The TCT tooth are regrindable.
Centre drill not included.
 
Centre drills:
Size 1 (hex 8 mm) with HSS drill = DDH1MP DDH1XLMP  for use in wood ect.
Size 2 (hex 10 mm) with HSS drill = DDH2MP DDH2XLMP  for use in wood ect.
Size 1 (hex 8 mm) with TCT drill = DDH1MPCT DDH1XLMPCT for use in bricks ect.
Size 2 (hex 10 mm) with TCT drill = DDH2MPCT DDH2XLMPCT for use in bricks ect.

Quick change of the hole saw.
Easy removal of the plug.
Drilling at an extreme angle.
Enlarging an existing hole.

More info...

Hole saws HSS Bimetal PLUS Variable pitch

HSS Bimetal PLUS hole saws for use in metal with an integrated Click&Drill® adaptor (0904).
With HSS Cobalt teeth.
Special tooth gerometry for a smoother cut and better chip clearance.
Variable pitch 4/6 teeth per inch.
Integrated adaptor, for quick change and easy removal of the plug.
To be used in steel, cast iron, messing, copper, aluminum, wood and hard plastics.
Available sizes:  14-210 mm.
Centre drill not included.
 
Centre drills:
Size 1 (hex 8 mm) = DDH1, DDH1XL
Size 2 (hex 10 mm) = DDH2, DDH2XL

More info...

Hole saw sets HSS Bimetal PLUS Variable pitch

HSS Bimetal PLUS hole saws sets for use in metal with an integrated Click&Drill® adaptor (0904).
With HSS Cobalt teeth.
Special tooth gerometry for a smoother cut and better chip clearance.
Variable pitch 4/6 teeth per inch.
Integrated adaptor, for quick change and easy removal of the plug.
To be used in steel, cast iron, messing, copper, aluminum, wood and hard plastics.
Centre drill(s) are included.
 
Sizes (see composition). Other compositions on request.

More info...

Hole saws HSS Bimetal PLUS Constant pitch

HSS Bimetal PLUS hole saws for use in metal with an integrated Click&Drill® adaptor (0905).
With HSS Cobalt teeth.
Special tooth gerometry for a smoother cut and better chip clearance.
Constant pitch 6 teeth per inch.
Integrated adaptor, for quick change and easy removal of the plug.
To be used in steel, cast iron, messing, copper, aluminum, wood and hard plastics.
Available sizes:  14-210 mm.
Centre drill not included.
 
Centre drills:
Size 1 (hex 8 mm) = DDH1, DDH1XL
Size 2 (hex 10 mm) = DDH2, DDH2XL

More info...

Hole saw sets HSS Bimetal PLUS Constant pitch

HSS Bimetal PLUS hole saws sets for use in metal with an integrated Click&Drill® adaptor (0905).
With HSS Cobalt teeth.
Special tooth gerometry for a smoother cut and better chip clearance.
Constant pitch 6 teeth per inch.
Integrated adaptor, for quick change and easy removal of the plug.
To be used in steel, cast iron, messing, copper, aluminum, wood and hard plastics.
Centre drill(s) are included.
 
Sizes (see composition). Other compositions on request.

More info...

Centre drills for HSS Bimetal PLUS hole saw Click & Drill ®

Centre drills for Bimetal Plus hole saws Click&Drill®.
for HSS Bimetal hole saws (0904 en 0905), cutting depth 38 mm.
Size 1 (hex 8 mm) for hole saws 14-30 mm.
Size 2 (hex 10 mm) for hole saws >32 mm.

More info...

Extensions for hole saws Click & Drill ®

Extensions for centre drills Click&Drill®
for Multi Purpose (0908) hole saws with a cutting depth of 52 mm
and HSS Bimetal PLUS hole saws with variabele (0904) and constant (0905) pitch.

More info...

SDS adaptors for hole saw Click & Drill ®

SDS adapters for the Click&Drill® centre drills.
for Multi Purpose (0908) hole saws with a cutting depth van 52 mm and HSS Bimetal PLUS hole saws with variable (0904) and constant (0905) pitch.

More info...

Hole saws Diamond Dry

Diamond Dry hole saws (0903).
For drilling holes in granite, ceramic and porcelain tiles and marble.
These Diamond Dry hole saws can to be used with a cordless drillingmachine (>1500RPM).

Smaller sizes (up to 16 mm) have a 8 mm hex and internal wax coolant.
Larger sizes come with an integrated Click&Drill® adapter, for which a centre drill, for accurate positioning, is needed. 
Diamond hole saw with integrated Click&Drill ® adapter to be used with a 8 mm centre drill (not included):
18, 20, 22, 25, 27 en 30 mm.
Diamond hole saw with integrated Click&Drill ® adapter to be used with a 10 mm centre drill (not included):
32, 35, 38, 41, 45, 51, 54, 55, 57, 65, 68, 73, 76, 83, 110 en 120 mm.

More info...

Hole saw sets Diamond Dry

Diamond Dry hole saws sets (0903).
For drilling holes in granite, ceramic and porcelain tiles, and marble.
These Diamond Dry hole saws can to be used with a cordless drillingmachine (>1500RPM).
 
Smaller sizes (up to 16 mm) have a 8 mm hex and internal wax coolant.
Lager sizes come with an integrated Click&Drill® adapter, for which a centre drill, for accurate positioning, is included.
 
Sizes (see composition). Other compositions on request.

More info...

Centre drills Diamond Dry Click & Drill ®

Centre drills for Diamond Dry hole saws (0903).

Size 1 (hex 8 mm): for diamond dry drril 18-30 mm
Size 2 (hex 10 mm): for diamond dry drril 32-120 mm

More info...

Wax Diamond Dry

Coolant wax for Diamond Dry hole saws (0903).

Recommended lubrication and cooling for a longet tool life.

More info...